|
| |
|
|
A proposal of production technology of a hinge part
Urbánek, Vojtěch ; Zemčík, Oskar (referee) ; Sliwková, Petra (advisor)
This thesis is aimed on proposal of production technology, NC codes and production of selected hinge part. The theoretical part describes the technologies of milling, surface grinding and hole grinding as technologies used during production and as non-production technologies of CAD/CAM software. Selected production machines and cutting tools are also specified and a technological process is proposed including all the steps and operations for the production of the hinge part. According to the proposed production plan, the work in two different CAM systems for the NC code of the machining center is described. The practical part describes the production on a CNC machining center and grinders. The economic evaluation summarizes material costs, setting production costs and the production and cooperation costs.
|
|
|
Description of outside grinding machines
Brychta, Tomáš ; Opl, Miroslav (referee) ; Blecha, Petr (advisor)
In this bachelor’s thesis is completioned background research and outside grinding machines description.In the introduction of this thesis are shown the aims which will be reached while elaborating. This thesis includes general introduction about grinding, where is mentioned definition of the grinding, description and grit distribution on grinder, parametres of grinders, reached geometric accuracy, reached surface roughness, cross section of cuttings, definition of the main and alternate movement and cutting conditions on the tool and on the workpiece at grinding.Furthermore general partition of grinding machines types, view and the parting of the grinding machines producers, with the references to their web sites and with data about country of origin for each of these producers. After it the thesis focus only on outside grinding machines and in their division. In centre grinding machines is shown their division and characterictics, ways of grinding and description of each way and there are shown producers of centre grinding machines with concrete tips of machines too. In each of this machine are shown its preferences and engineering characteristic. In profile grinding machines is shown its characteristic, producers of profile grinding machines and tips of these machines. In surface grinding machines is shown characteristic of surface grinding, the partition of the surface grinding machines, ways of grinding and description each way, producers of these grinding machines and tips of separate machine with its preferences and engineering characteristic. The last type of the outside grinding machines are centreless grinding machines. There is shown characteristic of centreless grinding, ways of grinding and the description each of the way, producers of centreless grinding machines and tips of these machines with its description and engineering characteristic. By the centreless grinding are shown even the ways of double disk grinding with the examples of utilization this grinding. The work is ended by finish, where is shown overall assessment in the way of grinding machines development, resources and innovations, which the producers using to increasing precision of the machines.
|
|
|
Finishing machining of hard-to-machine materials
Filípek, Timotej ; Varhaník, Matúš (referee) ; Píška, Miroslav (advisor)
The Master‘s thesis focuses on processing of hard-to-machine materials by the finishing machining methods. The first chapter comprises division and characteristics of finishing technologies in the field of machining processes. The chapter following includes division and characteristics of the hard-to-machine materials. The experimental part – another significant part of the thesis – is focused on grinding of mostly bearing rings made of hard-to-machine materials. The aim of the experimental part is to compare and subsequently assess the use of various kinds of grinding wheels in the grinding process of a given workpiece material. Several parameters are examined from the technological and economic point of view. The assessment of the experimental part provides an overview on the advantages and disadvantages of the use of the grinding wheels in the grinding process of a given material for large-scale production. The conclusion is a summary of the results obtained in the experimental part.
|
|
|
Production technology of drill
Křehlík, Luboš ; Kolář, Ladislav (referee) ; Osička, Karel (advisor)
The work deals with production technology stepped drill of cemented carbides. Handles the basic methods and information technology grinding. Cemented carbides are becoming more frequent choice of material for processing in many industrial directions. They allow widespread use due to their mechanical and technological properties. Tools of this material are manufactured on a 5-axis grinding machines. The use of precision CNC machines enables efficient and accurate production of both simple and complex cutting tools. Software CNC machines allow you to control the 3D simulation before production begins, it's a convenient tool for checking the functionality of the program. It is also possible to establish the production of the subsequent dimensional control of the finished piece. These CNC machines and cemented carbide tools can be used for both serial and piece production.
|
|
|
Final machining technology of a special bearing ring using a grinder on the holes
Růžička, Daniel ; Kalivoda, Milan (referee) ; Chladil, Josef (advisor)
The main goal of this thesis is to compare 5 chosen grinding wheels, that vary by the material and structure. The testing is done in the company SLB, spol. s r.o., using a grinder on the holes BDU 80, which is set to 6 different settings of the grinding cycle, defined by the letters A´, A, B, C, D and E. These settings vary by the cutting conditions and enable to compare the tested grinding wheels by 8 measured parameters of the surface quality of the grinded bearing orbits of outer rings of the SLB 84-74 bearings, that are described by the drawing documentation.
|
|
| |
|
|
On the Effective Machining of New Ceramic Materials
Sámelová, Vendula ; Sedlák, Josef (referee) ; Vrba, Vladimír (referee) ; Humár, Anton (advisor)
Advanced ceramics have long held the front of the list of promising materials for high-tech applications. The most common problem is the high cost of design, production and machining of advanced ceramics parts. The main sense of advanced ceramics processing techniques development is affordable, high-volume production. The dissertation is focused on SiC silicon carbide grinding. SiC is used in the design of machine parts due to its excellent properties The deep knowledge of the diamond wheel grinding process is important because it is one of the finishing methods and therefore has a direct impact on the quality and strength of the SiC parts. The key issue here is the overall surface quality of the parts after diamond wheel grinding and the knowledge of the factors that influence the surface quality. These include, in particular, grinding vibrations. The main purpose of the thesis is to create a system of specific scientific and technical information, which will allow applying optimal technological procedures in the processing of ceramic components. The theoretical part of the thesis contains an analysis of the current state of the art in the advanced ceramics machining area, detailed analysis of the ceramics grinding with diamond grinding wheels, signal analysis theory and analysis of surface quality assessment methods. The experimental part contains analysis and discussion of the results obtained during the monitoring of the silicon carbide grinding process with a diamond grinding wheel. Various diagnostic methods have confirmed the presence of vibrations at a frequency close to the speed frequency of the grinding wheel, which had a significant, negative effect on the samples surface quality. Vibration diagnostics has identified a specific source of vibration (clamping of the workpiece) and it has been removed subsequently.
|
|
|
Monitoring the effect of sample treatment in determining selected properties of biofuel
Štenclová, Kristýna ; Lachman, Jakub (referee) ; Lisá, Hana (advisor)
Diploma thesis is focused on the treatment of biofuel prior to combustion and effect of this treatment on the biofuel characteristics. The first part is a review of literature encompassing characteristics of fuel, preparation of samples, methods of analysis of individual characteristics and a presentation of various types of mills. The second part of thesis is experimental. It is an analysis of sample characteristics under various mill settings with regard to the temperature in the mill during grinding.
|
|
|
The proposal of advanced production technology of steel molds
Opršál, Radek ; Prokop, Jaroslav (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis deals with the modernization of steel mould production in the company P-D Refractories CZ a.s. The thesis focuses on the analysis of current production technology, determination of the bottleneck in production, and the analysis of the possibilities of modification of current technologies. The last part of the thesis proposes the most optimal methods of solution, introduces the technical procedure modified for the new solution and presents the evaluation of the data.
|
guest ::
